KGK Chemical Corporation.

 The data in our catalog is an example of the measured value of our test, not the guaranteed value.
Descriptions and specification values are subject to change without notice.
Please be sure to confirm that each customer is satisfied with your situation.
Please keep in a vertical stack in a cool and dark place with good ventilation avoiding direct sunlight.
Please remove oils, moisture, dirt, etc adhered to the surface of the paste cleanly and then paste as much as
possible without touching the adhesive surface.
Please be sure to check stock status at the time of ordering.
It is desirable that the application temperature be around 20℃.
Please apply pressure sufficiently after pasting.
There are times when the connection point is included in the product.
Product specifications may be changed without notice.

 Avoid condensation on the product, store it indoors so as not to be exposed to direct sunlight. Note that it is desirable to keep it under the following temperature and humidity conditions.

Temperature: 10 to 25 ℃ Humidity: 30 to 70% RH

 We can not manage the process conditions of each customer (processing of our products, bonding conditions, other conditions, or management there of).

Therefore, please understand that our company can not guarantee the characteristics and quality depending on the process of every customer.

Although the results described in our technical data etc. are based on actual data, we do not guarantee that equivalent results will be obtained for every customer's use.

The obligation of the seller is only to replace the product proved to be defective and we are not responsible for any injuries or damage resulting from the mismanagement of products handling.

Please check before using it to see if it fits your intended use. This is not the case if you received another responsibility in the contract signed by the seller 's officer.

 Many of our products are custom made products that individually produce according to customer's request size and shape.

In order to deliver the various demanded items from our customers at short delivery time, we will start the production from the
day of ordering date if we specify the delivery date at the time of ordering.

Even if you initiate production, even if you receive a request to cancel or change your order, it is very complicated to stop
production only for the targeted order, and the cost will increase and the production will be completed just like ordinary
shipments Direct cost (material cost + labor cost) will occur as it will be.

It is difficult to respond to cancellation / change of order to start production from the day of ordering.

However, we will correspond free of charge within 2 hours after ordering so we can respond to changes / cancellation of your
order contents on the ordering day.

Please pay half of the order amount until PM 4: 00 on the order date.
Please note that since PM 4: 00, we can not accept requests for changing / canceling your order details.
In the case of delivery date 1 day product and special order item, it can not be canceled even on the order day.

 When handling the product, individual differences may cause skin irritation, "rash", "headache" due to odor, "allergic symptoms"such as "discomfort".

Work in a ventilated environment or wear appropriate protective equipment such as "gloves", "mask", "protective eyewear".

Our products are also applicable to combustibles.
Please comply with laws and keep it, please discard it.

Please wear gloves etc. as necessary to avoid cutting your hands at the edge of the film.

Please do not leave the separated separator on the floor because it is slippery.